Previous Product Image

Juniper – Configurations JNP-QSFP-AOCBO-1M


Juniper – Configurations JNP-QSFP-AOCBO-1M

Next Product Image

Juniper MPC7E-MRATE 12x QSFP+/QSFP28 multirate port line card – MPC7E-MRATE-RTU


Width 0 inches
Length 0 inches
Shipping Weight 0 pounds
Pallet Quantity 0

SKU: MPC7E-MRATE-RTU UPC: Brand: Juniper Enterprise Routing Condition: New Category: Tag:


Juniper MPC7E-MRATE 12x QSFP+/QSFP28 multirate port line card

  • Line-rate throughput of up to 480 Gbps on MX240, MX480, and MX960 routers.

  • Line-rate throughput of up to 400 Gbps on MX2000 routers with SFB, and up to 430 Gbps on MX2000 routers with SFB2.

  • Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services

  • Twelve Gigabit Ethernet ports that can be configured as 40-Gigabit Ethernet port or as four 10-Gigabit Ethernet ports using a breakout cable. The ports support quad small-form factor pluggable plus (QSFP+) transceivers. The 40Gbps or 100Gbps ports configured to run at 10Gbps speed are shown in the CLI as follows:

    show interfaces terse
    Interface               Admin Link Proto    Local                 Remote
    xe-10/0/0:0             up    down
    xe-10/0/0:1             up    down
    xe-10/0/0:2             up    down
    xe-10/0/0:3             up    down
  • Four out of the twelve ports can be configured as 100-Gigabit Ethernet ports. Port numbers 0/20/51/2 and 1/5 are the four 100-Gigabit Ethernet ports.

  • You can configure different combination of port speeds as long as the aggregate capacity per group of six ports labeled 0/0 through 0/5 does not exceed 240 Gbps. Similarly, aggregate capacity per group of the other six ports labeled 1/0 through 1/5 should not exceed 240 Gbps.

Shopping cart


No products in the cart.

Continue Shopping